Pricing: Call or email


Specifications- 1.5 KW Wind Core

1.5 KW WInd Core

GENERAL DESCRIPTION
Rated Power Output
Maximum 1.5 kW
1.0 kW @ 11 m/s
Turbine Designed standards AWEA,MCS,IEC-61400 wind class II
Annual Power Production
Approximately 1771 kWh @ annual average wind speed of 5m/s
Approximately 2871 kWh @ annual average wind speed of 6m/s
Approximately 3968 kWh @ annual average wind speed of 7m/s
Start-up wind speed 2.5ms
Cut in wind speed 3.5m/s
Cut out wind speed 25 m/s
Survival wind speed
59.5m/s
Braking System Electronic stall regulation with automatic relay switch control
Rotor Blade diameter 1,5m
Rotor speed
150r/min
Generator Voltage240 vdc @ 150rpm
Rotor Speed Control Electronic speed limiter
Outer Ring Diameter 1.85m
Yaw Control Passive
Survival Wind Speed 52 m/s
Maximum Rotor Speed 400 rpm
Generator type Synchronous permanent magnet
Grid Feeding230 V, 50 Hz, 1 Ph (check with dealer for other configurations)
Battery Charging  Battery charge controller available
Grid Feeding 230v,50 Hz,110v,60Hz,1ph or 3ph
Turbine Controller Microprocessor based smart controller
Remote MonitoringWIPO remote monitoring centre
System Management WiCo control and monitoring software
Internet interface Lan / Wireless
Acoustic Emission < 35 db
Warranty 5 year or 10,000 kWh power production limited warranty **
Designed Life Span 25 years
Inverter Standards G 83
VDE 0126
Unit Weight Approximately 180 kg
Mounting System Wall mounting, pitched roof mounting, flat roof mounting (Specially designed mounting system with damping to reduce vibration);
Free standing (with hydraulic lifting tower)

 

WINDCore 1500 is designed for every household. After our dealers install it and connect it to your electricity meter, it will work with your electric utility together to power your house.  As long as the electrical grid is operating, the owner of WINDCore is never out of power regardless of the wind.

When the wind is blowing, WINDCore 1500 will catch the best wind and convert it into clean, household qualified electricity. Electricity produced by WINDCore 1500 will be used first and when there is no wind, supply will automatically revert to your utility company.

There are 2 options for the excess electricity produced by WINDCore 1500. First is to feed it back to the electricity grid with fixed feed-in tariff; second is to install a smart meter which can actually spin backwards – this means that you will be selling electricity back to the utility company. Detailed information can be obtained from your utility supplier.

We can also supply WINDCore 1500 based on specific customer requirements like charging battery, direct heating and etc.